This kind of agitator is the most basic type. PJ flow pattern is radial flow pattern, XJ and HJ have axial and radial split flow. When there is baffle, the power quasi value NP increases obviously, which is the upper and lower circulation flow, and the turbulence is strengthened. It is suitable for the mixing, dispersion, solid suspension, heat transfer and liquid phase reaction of low viscosity liquid. Our company can design for different industries and working conditions, and provide paddle agitators of various specifications and materials.

The inclination angle between the front blade surface and the moving direction of the propeller agitator is continuous (like that of the propulsive propeller), and the rear of the blade has a fixed inclination as the inclined blade surface. Therefore, it integrates the characteristics of the propulsive propeller and the inclined blade turbine propeller, and is a widely used agitator. It is similar to the propelling type, belonging to the axial-flow agitator, with large circulation capacity and low power consumption, and like the inclined blade turbine impeller, its shear performance has been improved, so it has a relatively large scope of application. Low viscosity liquid mixing, dispersion, dissolution, solid suspension, crystallization, heat transfer, liquid phase reaction and other processes are applicable, and also used in some gas absorption process. Our company can design for different industries and working conditions, and provide axial-flow propeller agitators of various specifications and materials.

The basic flow pattern of the open turbine stirrer is radial flow, and a small part has axial flow. When there is a baffle plate, it can form two circulation flows from the blade, which has high shear force and large circulation capacity. The shear force of straight blade turbine is the largest, that of curved blade turbine is the smallest, and that of inclined blade turbine is in the middle. Therefore, the straight blade open turbine type is more suitable for the dispersion operation process; the curved blade discharge performance is good, the blade is not easy to wear, it is more suitable for suspension operation process, and is also suitable for solid dissolution. They can be used in other mixing processes, so turbine agitator is the most widely used agitator in operation process. Our company can design for different industries and working conditions, and provide various specifications and materials of open turbine agitators.

The propulsive agitator is the most typical axial-flow agitator with high liquid discharge and low shear performance. The axial circulation is stronger and the discharge performance is significantly improved by using baffles or draft tubes. This kind of impeller has strong circulation ability and low power consumption. It can best reflect its advantages in low viscosity, large capacity homogeneous phase and mixing process. It is widely used in liquid heat transfer, reaction, suspension and dissolution with small solid-liquid ratio. Our company can design for different industries and working conditions, and provide various specifications and materials of propulsion agitators.

The basic flow pattern of disc turbine agitator is radial flow, and a few parts have axial flow. When there is baffle plate, it can form two circulation flow from the blade, which has high shear force and large circulation capacity. Among them, the straight blade disk turbine type has the largest shear force, the curved blade disk turbine type has the minimum shear force, and the inclined blade disk turbine type and arrow blade disk turbine type have the middle shear force. In the middle of the fermentation process, it is more suitable for the gas to be absorbed in the lower part of the stirrer. Among them, the six parabolic disk turbine (BTD) and the six semicircular disk turbine (HY) are two kinds of agitators widely praised in the current fermentation industry, and their gas dispersion performance is better. Our company can design for different industries and working conditions, and provide disc turbine agitators of various specifications and materials.

This kind of agitator is a slow speed agitator, which is often used in mixing, heat transfer and reaction of medium and high viscosity liquids. When the anchor frame agitator rotates at low speed, it can get large shear force along the wall, which can prevent settlement and wall adhesion. The bottom shape fits the elliptical tank bottom and the bottom bearing in the middle. Our company can design for different industries and working conditions, and provide anchor frame agitators of various specifications and materials.

This kind of agitator is a slow type agitator, which is often operated in laminar flow area. The agitator is close to the inner wall of the mixing tank. The stirring diameter is large, which strengthens the liquid near the tank wall. The liquid rises or falls along the spiral surface and forms an axial up-down circulation. It is suitable for the mixing, heat transfer and reaction of medium and high viscosity liquids. Our company can design for different industries and working conditions, and provide various specifications and materials of spiral ribbon screw agitator.

Such agitators are special purpose agitators, which are used to remove large quantities of froth on the liquid surface. The defoaming paddle is a medium and low speed type, rotating serpentine grate paddle, repeatedly colliding and churning the bubbles on the liquid surface, constantly destroying the generated bubbles, controlling the increase of the foam, and widely applying in fermenter, and the effect is good, and is installed on the upper part of the stirring shaft, and the installation is simple. Our company can design for different industries and working conditions, and provide various specifications and materials of defoaming paddles.

The stabilizing ring is used with the agitator at the same time, so that the mixing shaft can play the role of radial centralization in the working process. This series of stable ring structure is divided into integral wh and split WF. It is suitable for open turbine, disc turbine and propeller agitators. Our company can design for different industries and working conditions, and provide various specifications and materials of stability ring